2500 TPD mining process unit for heavy mineral separation

2500 TPD mining process plant for heavy minerals separationOur factory produce full sets mining equipments for separating Zircon sand, Rutile ore, Monazite, Ilmenite, Magnetic iron ore, Tin ore, Tantalum, Niobium and so on .The equipments include shaking table, spiral separator, electrostatic separator, magnetic separa

Featured Products

2500 TPD mining process plant for heavy minerals separation

Our factory produce full sets mining equipments for separating Zircon sand, Rutile ore, Monazite, Ilmenite, Magnetic iron ore, Tin ore, Tantalum, Niobium and so on .
The equipments include shaking table, spiral separator, electrostatic separator, magnetic separator, trommel, dryer, ARC plate separator, flotation machine...
If you are interested in our equipments, please feel free to contact us!
2500 Tpd Mining Process Plant for Heavy Minerals Separation
India 200 tons per hour zircon rutile ilmenite beach sand project.

 
Beach sand main contents :
Gold, Ilmenite, Rutile, Zircon, Tin, Hematite, Magnetite, Andalusite, Quartz, Corindone, Atlri, Garnet, Monazite, etc.
Customer' target: remove  magnetic minerals and get the high grade rutile, tin and Zircon, more important to high recovery gold ore. 

We design the processing flowchart as below:

1. Use sand pump feed material directly to spiral separator.  If there are some bigger stones in deep areas, can consider use trommel screen to separate out particles +2mm

2. Spiral separator:  use two-stages spiral separator, first stage is for rough concentration, the middling from first-stage will go to second-stage to concentrate again to get high recovery ratio.

3. Most of the heavy fractions are magnetic minerals, so in order to remove clean as much as possible, it is better to firstly use our factory special designed four rollers wet magnetic separator to remove magnetite ilmenite and hematite and weak magnetic ore.

4. the gold and zircon and other non-magnetic minerals goes to shaking table for concentration, also use two stages shaking table for getting higher concentration effect.

5. after the electrostatic separator, can get rutile and other minerals, maybe still including some magnetic minerals, so use a high intensity dry process magnetic separator to  remove the magnetic minerals again, the zircon will be more high grade up to 66% for sale a good price. 

We design different process flowchart depends on customer's actual mining condition.
2500 Tpd Mining Process Plant for Heavy Minerals Separation

The equipments details as below,


1). Spiral Separator (Spiral Chute)
Usage:
1. Rutile, ilmenite and zircon concentration
2. Iron ore, chromite and manganese beneficiation
3. Tin, tantalum and ore concentration
4. Gold, native copper and base metal recovery
5. Silica sands processing
6. Titano-magnetite concentration

Feature & Benefits:
Reasonable structure and small occupation area
High recovery, high efficiency, and precise separation,
Light in weight, rust and corrosion resistant;
Simple installation and Minimal maintenance requirements
Low operating cost and long operating life
Reliable running with minimal operator attention
Strong adaptability to fluctuation of feeding amount, density, size and grade;
2500 Tpd Mining Process Plant for Heavy Minerals Separation


Specification of Spiral Separator

Model5LL-15005LL-12005LL-9005LL-6005LL-400
Outside dia(mm)15001200900600400
pitch(mm)540,720900,720,540675,540,405450,360,270240,180
Pitch Dia Ratio0.75,0.6,0.450.75,0.6,0.450.75,0.6,0.450.75,0.6,0.450.6,0.45
Lateral slope
Maximum starts per column4-24-24-23-22-1
Max Feeding Size(mm)33333
Feeding Density(%)25-5525-5525-5525-5525-55
Capacity(T/H)8-64-62-30.8-1.20.15-0.2
External
Size
Length(mm)156013601060700460
 Width(mm)156013601060700460
 Height(mm)52305230400026001500
Weight (Kg)80060040015050

2500 Tpd Mining Process Plant for Heavy Minerals Separation

2). Shaking Table:

Shaking table for sale is one of the main equipments of gravity concentration. Gravity Concentration Equipment is not only widely applied on separating tungsten, the tin, the tantalum niobium and other rare metals and the noble metal ore. Also widely used in separation for Gold, Silver, Tin, Columbium, Tantalum, Titanium, Barium, Tungsten, Iron, Chrome, Manganese, Zircon, Lead, Zinc, Mercury, Copper, Aluminum, etc. The shaker effective recycling granularity scope is 2-0.037 millimeters.
2500 Tpd Mining Process Plant for Heavy Minerals Separation

Working Principle
The working principle of shaking table for sale is to use the combined action of the specific gravity difference of sorted minerals, alternating movement of bed surface, and transverse oblique water flow and riffle (or notch groove), to allow loose layering of ores on the bed surface and fan-shaped zoning. Then different products can be produced.

Features:
1.High recovery ratio;
2.Long working life due to new technology.

Model6s-7.66s-4.086s-1.956s-0.5
Deck typeCoarse ore deckFine sand deckSlime deck   
Benefication Area(m2)7.67.67.64.081.950.5
Deck sizeLength(mm)445044504450300021001100
Transmission end width (mm)18551855185513201050500
Concentrate end width (mm)154615461546110850430
Maximum feeding size(mm)20.50.15Sand -2 Slime-0.1Sand -2 Slime-0.074Sand -2 Slime-0.074
Feeding amount0.8-1.5ton/h0.8-1.5ton/h0.8-1.5ton/h0.4-1.5t/h0.3-0.8t/h0.05-0.2t/h
Feeding density(%)25-3020-2515-2510-30
Stroke(mm)16-2211-168-166-3012-289-17
Frequency(F)45-22053-25060-280210-320250-450280-460
Water added1-3t/h1-3t/h1-3t/h0.4-2t/h0.2-1t/h0.1-0.5t/h
Transverse slope of deck2°30-4°301°30-3°301°-2°0-10°0-8°0-10°
Longitudinal slope of deck1.40.92------------
Cross-section shape of deckrectangularsaw-toothtriangle---------
Motor power(kw)1.10.55
Transmission mechanismEccentric linkage

3). High Tension Electrostatic Separator and ARC Plate Separator

High tension electrostatic separator is intended for dry separation of minerals based on the electrical conductivity difference by applying high voltage electrical field.
Technical Specifications
• Separation Voltage: maximum 60kV
• Feed Particle Size: 0.04~3.0mm
• Drum Rotating Speed (Drum type): 30~300 r/min
Product Type
For Mineral and Recycle Industry
• Drum Type High Tension Electrostatic Separator - GES series
• Arc Plate/Sieve Plate electrostatic Separator - GAC series
2500 Tpd Mining Process Plant for Heavy Minerals Separation

Typical Application
Minerals industry, recycling industry and fly ash.
It is widely used for separate ilmenite, zircon, rutile, gold, copper, leucoxene, hematite, cassiterite, chromite, columbite, aluminum, monazite, quartz, feldspar, scheelite, barite, staurolite, kyanite, sillimanite, garnet, chopped wire, plastic, electronic scrap, plastic bottle, recycling, metal, non metal, computer cable, decarburization of fly ash, caron enrichment of fly ash...

Specification and models:
ModelGELIN-ES1GELIN-ES2GELIN-ES3GELIN-ES4GELIN-ES5GELIN-ES6GELIN-ES7GELIN-ES8
Rollers qt2pcs2pcs2pcs2pcs2pcs4pcs4pcs4pcs
Roller speed0-800r/min0-800r/min0-800r/min0-800r/min0-500r/min0-500r/min0-500r/min0-500r/min
Working voltage0-45kv0-45kv0-45kv0-45kv0-45kv0-60kv0-60kv0-60kv
Feed size0-2mm0-2mm0-2mm0-2mm0-2mm0-2mm0-2mm0-2mm
Capacity0.3-1t/h0.5-2t/h1-2.5t/h1-3t/h2-3t/h1-4t/h2-5t/h4-8t/h
2500 Tpd Mining Process Plant for Heavy Minerals Separation
4). Wet type magnetic separator & High intensity dry type magnetic separator
Both wet type and dry typte magnetic separator's magnetic field intensity from 800 gauss up to 15000 gausss.
It is very good to separate out strong magnetic iron ore, ilmenite, titanium, hematile, monazite, tin, zircon and other weak magnetic ore.
Wet type magnetic separator (we produce different rollers, such as one roller, two rollers, three rollers, four rollers...):

2500 Tpd Mining Process Plant for Heavy Minerals Separation

Dry type magnetic separator (we produce different rollers, such as one roller, two rollers, three rollers, four rollers...):
2500 Tpd Mining Process Plant for Heavy Minerals Separation

Our company & Customers Visiting

Ganzhou Gelin Mining Machinery Co., Ltd is an expert manufacturer of mining machines in China. Our company is located in Guzhang Industrial Zone, Shicheng county, Jiangxi province, covering an area of over 30000 square meters, having more than 30 sets of heavy processing equipment and with an annual outpurt of more than 2000 sets of mining machinery.
2500 Tpd Mining Process Plant for Heavy Minerals Separation--- PRE-SALE SERVICE ---

1.Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing;
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.
2500 Tpd Mining Process Plant for Heavy Minerals Separation

--- AFTER-SALE SERVICE ---

1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
     1) Installation & debug of the machinery
     2) Train the first-line operators & technical personnel
     3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term

--- ONE STOP SOLUTION ---

1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.
2500 Tpd Mining Process Plant for Heavy Minerals Separation
FAQ

Q: What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.

A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone,What is the general particle size(mm) of the raw ore?
3). What is the handling capacity(tons per hour) you plan to work with?
4).What is the elements of the raw ore? How much percent % of each minerals?

Q: Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?

A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.

Q: How long is the warrenty of your equipments? Does your company supply the spare parts?

A: The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.

Q: If i need the complete mineral processing line. is Gelin able to help us build it?

A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.

Welcome to visit our factory in your free time!

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours