Horizontal Slurry Pump Spares-Impeller

The impeller is the main rotating component which normally has vanes to impart the centrifugal force to the liquid.Usually,slurry pump impellers have a plain or a Francis type vane.
The plain vane has a leading edge square to the back shroud,whereas the Francis vane has a leading edge projecting into the impeller eye.
Some advantage of the Francis vane profile are the higher efficiency,improved suction performance and slightly better wear life in certain types of slurry because the incidence angle to the fluid is more effective.




Slurry Pump spares material
 
Slurry pump Impeller part code: B1052, B15127, C2127, D3147, E4147, F6147, FAM8147, G8147, G10147, G12147, GAM14147...
 
1) impeller material: A05,A07,A49,A61,N23 etc.
2) There are 3-6 impeller vanes. It depending on the size of the particles in the slurry.
3) Impeller type including Close, Semi-open and Open type. Impellers are generally closed because of higher efficiency and are less prone to wear in the front liner region. Open impellers are more common in smaller pumps or where particle blockage may be a problem or where the shear provided by an open impeller is an aid to pumping froth.

4) We can also produce the non-standard impellers for some special situations.
    a)Pumping coarse coal
    b)Pumping fibrous material
    c)Reduced diameter impellers
    d)Reduced eye impellers





 

Product Overview:




Naipu Impeller Parts Code
 

Naipu Other Pump Parts

Main Slurry Pump Parts : Impeller , Volute Liner , Casing , Throat Bush, Frame Plate Liner Insert , Cover Plate , Frame Plate, Pump Liner Expeller , Expeller Ring ,Stuffing Box , Expeller , Pump Shaft , shaft sleeve, Shaft Spacer, Bearing Assembly , Base, Stuffing Box, Gland Assembly, Bearing Housing , Lantern Ring , pump discharge pipe , flange and so on.



Naipu OEM Pump Parts
We can develop and produce a range of pumps according to different media situation to meet different duty requirements.There are Rubber Material such as R08 , R12, R26, R33, R38,R55,S03,S12,S31,S21,S42,S51,S52 etc , Wear Resistant Metal Material such as A05,A07,A12, A33, A49, A51,A61 and etc ,Corrosion Resistant Stainless Steel Material such as 201,304, 316, 316L,C55 Duplex Austenitic-Ferritic,Alloy 20,Hastelloy etc, Ceramic lining parts especially suitable for strong abrasion and corrosion mediums,and they can be interchangeable with standard slurry pump parts Ceramic Coated Stainless Steel such as J04,J05,J21,J24,J25,J26,J27,J31 etc.,Resistant Polyurethane like U01,U38, fully meet customers' request.

We can undertake various OEM orders for pumps as well as spare parts customized according to drawings or samples.

Naipu Workshop

NAIPU PUMP is a whole processing company, Start from Modeling Workshop,Casting Workshop,Heat treatment Workshop,Machining Workshop ,Assembly Workshop and Pump Testing Workshop are all by us. So we are modernization and integrated company to satisfy the requirement of the changing needs of market.