Direct Factory of slurry pump, sand gravel pump , dredging pump and OEM Service with 30 years producing experience
HH High Head Mining Slurry Pump
Description
Name: NP-HH High Head Slurry Pump
Pump Type: centrifugal
Drvie Type: ZVz/CRz/CV/DC
Power: motor/diesel
Discharge Size: 1to 6 inch
Capacity: 16.2-1008m³/h
Head: 25-118m
Material :High Chrome White Iron Cr27%
Main Pump Model : 1.5/1C-HH 3/2D-HH 3/2DD-HH 4/3E-HH 4/3EE-HH 6/4F-HH 6/4FF-HH 6/4x- HH 6S-H 8/6S-H 8/6X-H 6S-HP 8/6S-HP 8/6X-HP
Type Notation :
6X4F-NP-HH
6----- Suction Diameter(Inch)
4 ------ Discharge Diameter(Inch)
NP---- ShiJiaZhuang NaiPu Pump Co.,Ltd
HH ------ High Head Slurry Pump
NP-HH SLURRY PUMP PERFORMANCE PARAMETERS
| Type | Allowable Mating Max. Power(Kw) | Clear Water Performance | Impeller | |||||
| Capacity/Q m³/hr | Head/m | Speed/rpm | Max Efficiency/% | NPSH/m | Nos of Vane | Impeller Diameter/mm | ||
| 1.5X1C-NP-HH | 30 | 16.2--34.2 | 25-92 | 1400--2200 | 20 | 2--5.5 | 5 | 330 |
| 3X2D-NP-HH | 60 | 68.4--136.8 | 25-87 | 850--1400 | 47 | 3-7.5 | 5 | 457 |
| 4X3E-NP-HH | 120 | 126-252 | 12-97 | 600-1400 | 50 | 2-5 | 5 | 508 |
| 6X4F-NP-HH | 560 | 324-720 | 30-118 | 600-1000 | 64 | 3-8 | 5 | 711 |
| 8X6S-NP-HH | 560 | 468-1008 | 20-94 | 500--1000 | 65 | 4-12 | 5 | 711 |
Feature:
1. HH Horizontal Slurry Pumps are 100% fully interchangeable with the most common slurry pump design in the mining industry
2. NP- HH Slurry pump is a horizontal double-shell axial suction centrifugal slurry pump.
3. The discharge of the pump can be installed every intervals of 45° Rotating eight direction within 360°
4. The HH slurry pump can deliver strong abrasive slurry in a small flow low head region, that is, in a region where the rotational speed is lower than 50% of The maximum rotational speed of the pump and the outlet flow rate of the pump is less than 8 m/s. In the high head large flow area,The Pump can transport light abrasive slurry.
5. All Standard seal options are available of centrifugl , gland or mechanical type.
6. HH High Head slurry pump sizes range from 25mm discharge size through to 150mm
7. The impeller and liner for HH High Head Slurry Pump are adoptable of wear resistant metal only.
Application:
HH Metal Liner High Head slurry pumps are widely used in mining, power, metallurgy, coal, deading, building material and other industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries.
Tailings Delivery
Cyclone Feed
Diamond Concentrate
Slag Granulation
Bottom Boiler and Fly Ash
Mill Discharge
Construction for HH High Head Slurry Pump
Main Part Number At The Drawing
| 032:Frame Plate 110:Volute Liner 041:Frame Plate Liner Insert 124: Volute Cover Seal 122: Stuffing Box Seal | 132:Discharge Joint 147:Impeller 013:Cover Plate 083:Throat bush 060: Intake Joint |
Materials of Construction
| LINERS | IMPELLERS | CASING | BASE | EXPELLER | EXPELLER RING | SHAFT SLEEVE | SEALS | |
| Standard | Chrome Alloy | Chrome Alloy | SG Iron | SG Iron | Chrome Alloy or SG Iron | Chrome Alloy or SG Iron | SG Iron | Rubber |
Company Profile
ShiJiaZhuang NaiPu Pump Co.,Ltd , Is one of professional factory of slurry pump, sand gravel pump , dredging pump , Water pump and spare parts .
NaiPu Pump is devoted to pump solution industry for more than 30 years!
The Pumps are widely used in in metallurgy, mining, Nonmetallic Mining, Coal, Energy
resources, Sand mining, Dredging, Environmental protection, Petrochemical engineering, Flue gas desulfurization and other industrial departments.
The Pumps have been exported to USA, Canada, Germany, Russia , Australia, South Asia, North America, South Africa, and etc , up to more than sixty countries.
Main Pump Model
Main Slurry Pump Parts : Impeller , Volute Liner , Casing , ThroatBush, Frame Plate Liner Insert , Cover Plate , Frame Plate, Pump Liner Expeller , Expeller Ring ,Stuffing Box , Expeller , Pump Shaft , shaft sleeve, Shaft Spacer, Bearing Assembly , Base, Stuffing Box, Gland Assembly, Bearing Housing , Lantern Ring , pump discharge pipe , flange , and so on.
OEM Service
Based on many years of rich experience in slurry pump manufacturing and design, NAIPU can undertake OEM customization for the whole set of pump and various spare parts.
Not only for pump and spare parts , also for other others mining wear parts. we have done many special spare parts for customer. Like Crusher spare parts , Cyclone parts , ball mill Liner . Material can be High chrome alloy , Stainless steel , Ductile Iron, Alloy 20, Hastalloy C and so on
Our Service
1. Quick Reply
Your inquiry related to our products or prices will be
replied within 12 hours.
2.Pump Choice .
We can help to select the suitable pump
3.Technical Surport .
We have a group of high quality technicians with rich experience who can solve everything during the whole process.
4.Guarantee quality.
All the products have proved by ISO 9001:2008, CE, SGS. And also will be inspected strictly before delivery.
5.Perfect after -sales .
We will be responsible for the whole life period
6.OEM order.Many material are available ,like High chrome, rubber , stainless steel and etc.Steely alloy.
Contact person : Kitty Liu