Heavy Cdl Cdlf High Pressure Vertical Multistage Centrifugal Water Pump

Vertical multistage centrifugal pumps high pressure water pumpIntroduction                                                        CDL CDLF vertical multistage stainless steel&

Featured Products

Vertical multistage centrifugal pumps high pressure water pump

Introduction                                                        
CDL CDLF vertical multistage stainless steel centrifugal pump, processed from the world advanced 
technology ,takes the advantages of outstanding design of hydraulic model, high efficiency and sound 
energy conservation. The inside impeller, casing and other main components are all stainless steel punched
The flow channel is fairly smooth. The bearing shell and sleeve are made of hard alloy to achieve
excellentservice life and to avoid secondary pollution.Shaft seal uses wearing resistant 
mechanical seal to enable sound leak-tightness. 

Product details:

Working Principle:Centrifugal, Multi-stage
Main applications:  Water
Driver:Electric motor
Power Specs:220V/380/415V 3phase; 220/240V 1phase; 50hz/60hz,etc
Max.permissible fluid temperature:80ºC/120°C(hot water type)
Type of connection:Flange connection
Installation position:Vertical
Impeller/diffuser/inducer/shaft mateiral:Stainless steel 304 or 316
Shaft seal type:  Mechanical seal
Maximum drive rating: 110KW(150HP)
Maximum caliber:  150mm(6inch)
Maximum dischrage-side pressure:2.55MPa(25.5bar)
Maximum head:255m(836.4ft)
Flow rate range: 1-240m3/h(4.4-1056US.GPM)

Application:
CDL/CDLF is a kind of multifunctional products. I can be used to convey various medium from tap water to industrial liquid at different temperature and with different flow rate and pressure. CDL type is applicable to conveying non-corrosive liquid, while CDLF is uitable for slightly corrosive liquid.
1. Water supply: Water filter and transport in Waterworks, boosting of main pipeline, boosting in high-rise buildings.
2. Industrial boosting: Process flow water system, cleaning system, high-pressure washing system, fire fighting system.
3. Industrial liquid conveying: Cooling and air-conditioning system, boiler water supply and condensing system, machine-associated purpose, acids and alkali.
4. Water treatment: Ultrafiltration system, reverse osmosis system, distillation system, separator, swimming pool.
5. Irrigation: Farmland irrigation, spray irrigation, dripping irrigation.

Operation conditions: 
•Thin, clean, non-flammable and non-explosive liquid containing no solid granules and fibers.
•Liquid temperature:
 Normal temperature type: -15C~+70C,
 Hot water type: -15C~+120C
•Ambient temperature: up to +40C
•Altitude: up to 1000m
 

Max. Working pressure:
The following figure shows the limitation of pressure and temperature, which shall be in the scope as shown in the figure.

Performance curve: 
Following conditions are suitable for the performance curves shown bellow:
1. All curves are based on the measured values of 50Hz: Constant motor speed 2900rpm or 2950rpm
2. Curve tolerance in conformity with ISO9906 Annex A.
3. Measurement is done with 20C air-free water, kinematic viscosity of 1mm ²/sec.
4. The operation of pump shall refer to the performance region indicately by the thickned curve to prevent overheating due to too small flow rate or overload of motor due to too large flow rate.

High Pressure Vertical Multistage Centrifugal Water Pump for Heavy Duty Cdl Cdlf


Section drawing CDL/CDLF1,2,3,4:
 High Pressure Vertical Multistage Centrifugal Water Pump for Heavy Duty Cdl CdlfSection drawing CDL/CDLF8,12,16,20:
High Pressure Vertical Multistage Centrifugal Water Pump for Heavy Duty Cdl Cdlf
Section drawing CDL/CDLF32,45,64,90:
High Pressure Vertical Multistage Centrifugal Water Pump for Heavy Duty Cdl Cdlf
Section drawing CDL/CDLF120,150,200:
High Pressure Vertical Multistage Centrifugal Water Pump for Heavy Duty Cdl Cdlf

Packing

High Pressure Vertical Multistage Centrifugal Water Pump for Heavy Duty Cdl Cdlf

we can supply the detail drawing if you need ,


 Question 1: Are you a factory or a trade company?
Answer: We are a factory and have our top sales for the trade service.

Question 2: Can I try to get a SAMPLE before the order?
Answer: Sure. You can ask for the samples. but they're unfree.

Question 3: Where is your factory located? How can I visit there? 
Answer: Our factory is located in Ningbo, China. You can fly to Ningbo or Shanghai airport directly. All our clients, from home or abroad, are warmly welcome to visit us!

Question 4: How does your factory do regarding quality control? 
Answer: Quality is priority. We always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001 authentication.

Question 5: How about the lead time?
Answer: Within10-50 days after getting the prepayment.
Question 6: How can we pay?
Answer: For small sample shipping cost, you can pay either by paypal or by T/T. And by T/T at sight for large amount of the order.
 
Question 7: If OEM available?
Answer: Yes, we provide all of our products OEM /ODM service.

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours